✓ TradeExamPro

TradeExamPro › HVAC & Refrigeration

NATE heat pump service and installation practice test

249 free practice questions for this exam, each with the reason for the answer and where to look it up.

Beta. These questions are new. They were written and checked with AI and have not yet been reviewed by a licensed tradesperson. If one looks wrong, use “Report this question” and we will fix it.

HVAC fundamentals: practice test

10 questions, graded as you go, with the reason for every answer. No sign-up.

Practice tests that prepare you for this exam

About the exam

ExamNATE heat pump service and installation
Who runs itNATE
WhereUnited States

Question count, time limit and pass mark differ by where you take it. Check the official candidate bulletin from the organisation that runs your exam.

Sample questions

Using the nominal 400 CFM per ton, how much airflow does a 3-ton air conditioner need?

Answer in CFM.

Show the answer

1200 CFM

Airflow = tons x 400 CFM per ton = 3 x 400 = 1,200 CFM.

Reference: Nominal airflow per ton of cooling

A heating element with a resistance of 12 ohms is connected to 240 V. How much current does it draw?

Answer in A.

Show the answer

20 A

I = E / R = 240 V / 12 ohms = 20 A.

Reference: Ohm's law

A heat pump delivers 36,000 Btu/h of heat while drawing 3.0 kW. Using 3,412 Btu/h per kW, what is its COP? Answer to two decimal places.

Answer in COP.

Show the answer

3.52 COP

Input = 3.0 kW x 3,412 = 10,236 Btu/h. COP = output / input = 36,000 / 10,236 = 3.52.

Reference: Coefficient of performance

Taking this exam?

Tell us where and when you are taking it, and what you want more of. It decides what we write next.

Other hvac & refrigeration exams with practice tests

EPA Section 608 (Core, Type I, II, III, Universal) · EPA Section 609 motor vehicle air conditioning · HVAC / mechanical journeyman · HVAC / mechanical contractor · NATE Ready-to-Work and HVAC Support · NATE air conditioning service and installation · NATE gas heating service and installation · Refrigeration journeyman / operating engineer · RSES CM / CMS